Journal influence
Higher Attestation Commission (VAK) - К1 quartile
Russian Science Citation Index (RSCI)
Bookmark
Next issue
№3
Publication date:
13 September 2024
Journal articles №1 2014
21. Automated system of testing software in compiled form [№1 за 2014 год]Authors: Palyukh B.V. (pboris@tstu.tver.ru) - Tver State Technical University, Ph.D; Semenov N.A. (dmitrievtstu@mail.ru) - Tver State Technical University, Ph.D; Burdo G.B. (gbtms@yandex.ru) - Tver State Technical University, Ph.D; Melnikova V.V. (viklipse@mail.ru) - Tver State Technical University, ;
Abstract: The article states that the essential condition of an extensive software use is ISO/IEC 00002 certification. It in-volves formal testing by specialists to ensure its compliance with standards and regulations. Testing is to be ensured by a specified quality of the assigned tasks results. The article points out that certification provides controlled program running with a finite set of data and its further analy-sis in order to detect errors. The analysis proves relevance of the following problem: software has to be tested in a compiled form. The authors propose the modified genetic algorithms as a tool for creating a finite set of data. The article presents a meth-odology (topology) of the initial data (ID) representation using software tools for engineering calculations. The topology in question can be reduced to representation of three types of variables: ID sets of real random type within a certain range, ID sets of positive integer type within a certain range, sets of logical (Boolean) variables. The authors suggest the initial data to-pology coding genotype as three chromosomes. An algorithm of the finite data sets generation is developed, with the data completeness criteria being established. The sequence and technique of software testing is described. The procedure-oriented (production) models to evaluate test results are given as examples. The article shows the advantage of this method compared to the current means of certification of compiled software.
Keywords: finite data set, procedure -oriented (production) models, topology, genotype, testing and certification of compiled software
Visitors: 6234
22. Problems of information retrieval as part of a distributed intelligent software system of information support of innovation [№1 за 2014 год]
Authors: Borisov A.L. (delije-cz@yandex.ru) - Tver State Technical University, Ph.D; Chokhonelidze A.N. (444595@pochtf.ru) - Tver State Technical University, Ph.D; Borisov S.Yu. (delije-cz@yandex.ru) - Tver State Technical University;
Abstract: The article is dedicated to one of the most popular and promising partition of information retrieval – cluster analysis of electronic text documents in natural language. The introduction of the article briefly reveals the essence of the matter, determines the purpose of the article, justify the applicability of chosen topic. In the main part of the paper there is a brief description of "Intelligent distributed software system of information support for innovation in science and education". It is a software system developed as part of researching a mechanism of cluster analysis to solve highly relevant information retrieval of electronic collections of text documents, as well as the nature of changes in the performance of clustering algorithms in a local and distributed computing environment. In addition, the article reveals the essence of using cluster analysis to solve problems of information retrieval. It also identifies the main problem s of this analysis – scale computing problems – and makes recommendations to solve them. As a recommendation, the authors propose a solution of the identified problems using grid computing technology. The potential effect of its application is justi-fied.
Keywords: classification, innovations, algorithm, vector space, processing, text, natural language, scale, grid, clusterization, artificial intelligence
Visitors: 13399
23. Three dimensional vlsi floorplanning subsystem considering elements’ mutual thermal effect [№1 за 2014 год]
Authors: Kureichik V.M. (kur@tgn.sfedu.ru) - Taganrog Institute of Technology Southern Federal University, Ph.D; Kulakov A.A. (kulakov@tgn.net.ru) - Taganrog Institute of Technology Southern Federal University;
Abstract: The paper describes the approach to the floorplanning problem in three-dimensional through-silicon vias inte-grated circuits with the heat distribution optimization. Formulation and the objective function of the floorplanning optimiza-tion problem are described. The article proposes the approach based on combination of genetic algorith m and simulated an-nealing algorithm. It considers elements’ mutual thermal effect by scheme thermal modeling. The algorithms combination is implemented by inserting a local search operator in the genetic algorithm. An operator is applied to the population after the mutation operator. The paper describes the method of modified B*tree to represent circuit topology of three-dimensional in-tegration IC. Calculation of a circuit thermal characteristic in the paper is based on a simplified and full thermal model. Thay signifi-cantly reduce the time complexity of the planning algorithm. Complex thermal model calculates the temperature in the steady numerical method of finite differences. For the midterm evaluation of the maximum temperature the simplified thermal mod-el with sufficient accuracy for estimating of the heat distribution is offered. The developed planning software architecture based on the object-oriented approach with code separation scheduler, cal-culation of the objective function and thermal modeling in separate modules are described. The experimental results and con-clusions on the applicability are outlined.
Keywords: genetic algorithm, simulated annealing, heat dissipation, planning three-dimensional integrated circuits, three-dimensional integrated circuits
Visitors: 9738
24. Automated system for synthesis of physical principle of technical systems action [№1 за 2014 год]
Authors: Fomenkov S.A. (saf@vstu.ru) - Volgograd State Technical University, Ph.D; Gopta E.A. (gopta.evgeniy@gmail.com) - Volgograd State Technical University;
Abstract: The paper discusses and analyzes the existing methods for the synthesis of physical principle of technical sys-tems. The research has shown that practical using of existing methods for the synthesis of structures of physical action prin-ciple does not meet the needs of scientists and engineers fully. To mitigate identified drawbacks, more efficient and fast method to automate the synthesis of the physical principle of operation had been developed. It is based on the analysis of properties changes of the object of physical effects. The new compatibility conditions include analysis of physical effects compatibility according to impact, structure and objects phase, as well as the range of values of physical quantities. Based on proposed conditions of compatibility, automated synthesis system of the physical principle of action was developed. It allows increasing the quality of the technical decisions. The paper presents the architecture of an automated synthesis system and its database scheme. It also presents a variety of diagrams in UML notation, explaining the operation of the automated synthesis system of the physical principle of action.
Keywords: an automated system issue, physical principle of action, structures synthesis, compatibility conditions, object phase, object structure, physical effect
Visitors: 10986
25. Analog modeling of electromagnetic fields based on electrotechnical devices [№1 за 2014 год]
Authors: Vasileva O.V. (vasileva.o.v@mail.ru) - National Research Tomsk Polytechnic University, Ph.D;
Abstract: The article is devoted to transforming the differential equations solving in private derivatives into well devel-oped investigative techniques for nonlinear dynamic systems. These systems allow comparing the equation in private deriva-tives with dynamic system to its subsequent modeling using electrotechnical devices, analog-digital complexes. The paper al-so considers modeling pictures of electromagnetic fields based on transients without false jumps at construction of equal cu r-rent lines. The novelty of the algorithm is in the reduction of differential equations in partial derivatives of Laplace and Pois-son to a dynamical system – the system of the first-order nonlinear differential equations on the basis of electrotechnical equivalent circuits. Solving system of the first-order nonlinear differential equations is carried out in the MATLAB-Simulink GUI environment, where the choice of parameters of input data block for implementing a complex of programs is offered to the user. It is for simplification and understanding of using given program. The block diagram of the dynamic system is created. It displays the dynamics of the process, where elements of the scheme are operational amplifiers. Those amplifiers are the base for comparison of the electrical equivalent circuit. The art i-cle gives examples of creating static electromagnetic fields in a phase plane.
Keywords: matlab-simulink, block diagram, dynamic system modeling, electromagnetic field, equal current lines, modeling
Visitors: 16003
26. Modeling decision-making processes in compex organizational and technical systems [№1 за 2014 год]
Authors: Zavgorodniy V.N. (zavgor@list.ru) - Military Institute of Continuing Professional Education of the VUNTS Navy "Naval Academy", Ph.D;
Abstract: The article considers the class of confronting organizational and technical systems. The operation of these sys-tems is based on the extensive using of technical means and carried out in interaction with the environment. Environment which affects a controlled object in the process of realization of tasks is interpreted as "nature" in the article. Uncertainty in knowledge of the decision maker in factors, conditions and mechanisms of the controlled object (subject) functioning is understood as the game-theoretical uncertainty. The article considers the family of multicomponent games. A two-component game model that is formed from matrix and statistical games-components in terms of functioning of the confronting organizational and technical systems is re-searched. The article proposes approaches to solving multicomponent games for modeling decision support. Given research direction can be useful in the development of decision support systems.
Keywords: decision maker, theory game model, organizational and technical systems, decision support system
Visitors: 10932
27. Methods and algorithms for determining the position and orientation uav using on-board videocameras [№1 за 2014 год]
Author: Stepanov D.N. (mitek1989@mail.ru) - Program System Institute of RAS;
Abstract: The article is devoted to the development of software for simulating flying an unmanned aerial vehicle (UAV) and its autonomous positioning using computer vision, computer graphics and parallel computing. The relevance of the a u-tonomous UAV positioning without using satellite systems GPS and GLONASS is discussed. Conveyor -parallel software system “PPS INS” is used as the basis of the "Navigator-M". This system was developed at PSI RAS. Statement of the au-tonomous positioning problem is described. The approach to its solution is based on a satellite image of the part of the Earth's surface over which vehicle performs its flights. This image is also used to generate a video sequence of frames from the camera installed on the virtual vehicle. The problem of positioning the UAV is reduced to the calculation of the projective transformation parameters. A transformation links the images from satellites (AES) and the UAV using pairs of corresponding points observed in both images. An a p-proach that allows speeding up the search for such pairs is described. Experiments have shown that "Navigator-M" success-fully solves the problem of automatic determination of the position and orientation of the UAV. Various methods of calcula t-ing the position and orientation of the UAV in flight, as well as methods to improve the stability of the system at a differe nt time of a day, weather conditions and time of a year are described.
Keywords: image pyramids, artificial Earth satellite, feature points, gdal2tiles, computer appliance, computer vision, modeling, evristick, opencv, uav
Visitors: 21746
28. Synthesis of the subscriber telecommunication networks structure [№1 за 2014 год]
Authors: Dmitriev G.A. (kirsanich@mail.ru) - Tver State Technical University, Ph.D; Margolis B.I. (borismargolis@yandex.ru) - Tver State Technical University, Ph.D; Muzanna M.M. (mohamed1984a@yahoo.com) - Tver State Technical University;
Abstract: The need to separate the telecommunication network in terms of topological structure on the terminal (su b-scriber) and a core (backbone) network is described. The problem of synthesis of a subscriber network is stated. It represent s minimizing the sum of the distances from the subscribers to the main switching nodes with limitations of the ability to con-nect each subscriber to a single site. A complete matrix of distances from the subscribers to the switching nodes is presented. It is shown that the problem of subscribers’ optimal connection to sites switching refers to the class of linear integer pr o-gramming problems with equality constraints. The equality constraints for each subscriber’s connection conditions to one node switching is formulated. Based on the MatLab bintprog standard function, the authors have developed the program that allows synthesizing the topological structure of a user's network using a plurality of users, multiple nodes and switching ma-trix of distances between them. The paper shows the results of calculating the optimal connection of subscribers with the cri-terion of minimum sum of distances to the switching nodes for the telemedicine network of the Republic of Yemen. The art i-cle presents a method for calculating capacity of subscriber communication channels based on the supposed information flow for the received structure of subscriber network and its maximum load. Results of bandwidth calculation for the resulting structure of subscribers network of the Republic of Yemen that is received from synthesis.
Keywords: bandwidth, subscriber network, backbone network, switching node, distance matrix, linear optimization, equality constraints, topology, optimal connectivity, communication channel, maximum load carrying capacity, telecommunication network
Visitors: 9747
29. Synthesis gas telemedicine networks [№1 за 2014 год]
Authors: Margolis B.I. (borismargolis@yandex.ru) - Tver State Technical University, Ph.D; Muzanna M.M. (mohamed1984a@yahoo.com) - Tver State Technical University;
Abstract: The article considers the graph model of structural-functional synthesis of backbone telecommunication net-work. It also describes the problem of the backbone structure synthesis. This problem is in minimizing the distances when passing information to the regional switching nodes. The optimal routes for information passing to the regional nodes of backbone network are obtained using a matrix of distances between backbone nodes and the graphshortestpath function in MatLab. The problem of parametric synthesis of backbone network is considered. It consists in determining the capacities of the main communication channels using synthetic topological structure and values of the input streams from subscribers. It is shown that the problem of parametric synthesis of backbone network belongs to a class of nonlinear optimization problems with constraints like inequality and equations. Inequality constraints are formulated for capacity of channels and the type of conservation equations for saving flows in the network nodes. The article presents a developed program that allows finding the optimal information flows in the backbone communication channels using criteria of average messages delay and maxi-mum network load. The program is developed on the basis of the standard fmincon function in MatLab. A methodology for calculating capacity for maximum information flows in the main channels to regional switching nodes. There are the results of calculation of optimal channels capacities for backbone telecommunication network backbone of the Republic of Yemen. An example of passing information to the particular backbone source node and the regional destination node is shown.
Keywords: inequality constraints and equations, telecommunication network, backbone network, structure synthesis, switching node, distance matrix, parametrical synthesis, topology, information stream, capacity, nonlinear optimization,
Visitors: 10565
30. Algorithms for synthesis of band-blocking filters on smooth inhomogeneous lines for CAD microwave devices [№1 за 2014 год]
Authors: Berdyshev R.V. (berd696969@mail.ru) - Military Academy of the Aerospace Defence, Ph.D; Kordyukov R.Yu. (romkord@yandex.ru) - Main Department of scientific and research activities and technological support of the advanced technologies of the Ministry of defense of the Russian Federation, Ph.D; Berdyshev V.P. () - Military Academy of the Aerospace Defence, Ph.D; Pomazuev O.N. (romkord@yandex.ru) - Main Department of scientific and research activities and technological support of the advanced technologies of the Ministry of defense of the Russian Federation; Khripun S.I. (hripun-8@mail.ru) - Management of development and organization of orders means aerospace defense Ministry of defense of the Russian Federation;
Abstract: he paper is devoted to the development of algorithms for the synthesis of small band-blocking filters on smooth inhomogeneous lines that allow determining their structure and parameters, calculating the level of attenuation, re-searching potential of the frequency characteristics and possibilities of practical implementations for using in specialized CAD microwave. The disadvantages of known CAD are presented. The base of the algorithms is a new approach to obtaining one lane locking in filters on smooth inhomogeneous lines. This differs from the known Kona approach calculating resonator filters with inverters. New approach applies only half-wave or quarter-wave segments of inhomogeneous lines that switched on in "the passage". Forming the required characteristics of the filter operating attenuation happens because of local refle c-tions arising from change of a wave resistance of open loop homogeneous line wh en changing the deduction of input re-sistance in one of the poles. Known methods involve using multiple-cavity structures with additional links. It is shown that the wave resistance oscillates for the value of the specified wave resistance with frequency o f two times bigger than the reso-nant frequency with a change deduction. The values of a wave resistance are proportional to the changes deduction magn i-tude and decrease with increasing the length to the specified wave resistance of the transmission line. T he analytical expres-sions for determination of the wave resistance law, a resistance matrix of inhomogeneous lines, the frequency characteristics of the filter with one bar of locking are recieved. An equivalent circuit line is determined. An algorithm for calculating the working attenuation is proposed. The results of mathematical modeling are presented. It is shown that using of the proposed algorithms allows expanding the range of base-building elements for band-blocking filters. It also can improve the functioning quality of existing and prospective specialized CAD microwaves.
Keywords: CAD system, synthesis, algorithm, ragged lines, microwave filters, wave resistance
Visitors: 16133
◄ ← Preview | 1 | 2 | 3 | 4 | Next → ►